HPE Community
HPE 9000 and HPE e3000 Servers
1753726 Members
4568 Online
108799 Solutions
New Discussion юеВ

Locator LED on rp3410

 
David Connolly
Regular Advisor

тАО11-10-2005 09:59 PM

тАО11-10-2005 09:59 PM

Locator LED on rp3410

Folks,

Is there a method of turning on the locator LED from the OS command line (not the MP)?

Thanks in advance.
0 Kudos
5 REPLIES 5
Luk Vandenbussche
Honored Contributor

тАО11-11-2005 01:29 AM

тАО11-11-2005 01:29 AM

Re: Locator LED on rp3410

David,

You can only do this from the MP prompt
0 Kudos
David Connolly
Regular Advisor

тАО11-11-2005 01:32 AM

тАО11-11-2005 01:32 AM

Re: Locator LED on rp3410

Thanks Luk.
0 Kudos
timmy b.
Honored Contributor

тАО11-11-2005 09:07 AM

тАО11-11-2005 09:07 AM

Re: Locator LED on rp3410

David,
depending on your firmware, you can also turn it on from the ILO.
There are 10 kinds of people in this world: Those who understand Binary, and those who don't.
0 Kudos
David Connolly
Regular Advisor

тАО11-13-2005 07:10 PM

тАО11-13-2005 07:10 PM

Re: Locator LED on rp3410

Hi Timmy - what's the ILO?
0 Kudos
Andrew Rutter
Honored Contributor

тАО11-13-2005 07:55 PM

тАО11-13-2005 07:55 PM

Re: Locator LED on rp3410

hi david,

ilo is the intregated lights out management board. You will only have this if you purchased it extra.

You can however also turn it on if you use the SIM, (systems insight manager)
This is software that can be installed, installed by defualt as of 11iv1 latest releases.
You can either run it on this server to manage your others aswell, or have it installed on another server to manage this one.

Andy
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.