N4000 Aor B model?

[doris grady]

Is there a resource that i can use within HP find out if an N4000 is an A or a B without physically looking at it? I have the Serial Number -- USM4032589 -- but am not physically located with the server.
Thanks.

[DCE]

stm (or xstm if you prefer gui) will allow you to get the model number

Dave

[Robert-Jan Goossens]

Hi,

Or log into the GSP and check the firmware revision.

Control B on the console.

GSP> he

-->
A.01.12 -> revision A
B.02.20 -> revision B

HTH,
Robert-Jan

[Sameer_Nirmal · Accepted solution]

Run following cstm commands to get the required information
#echo "selall;info;wait;infolog;view;done" | cstm >/tmp/cstm.txt
# cat /tmp/cstm.txt

The output of would give product number just below the Model string.
If it is A3639A , then it N4000 A
If it is A3639B , then it N4000 B

[Jesse Dougherty]

Doris, that serial number comes up as a B version, follow the link below and it will give you a little information about your USM4032589 / N4000. Type in the serial number and A3639B.

http://www2.itrc.hp.com/service/ewarranty/warrantyInput.do

Jesse
Cypress Technology Inc