no BCH on rp7410

[Roro_2]

Hello,

Our customer is not able to boot partition 0 (one cell in slot 1) of the rp7410 server.
I am not getting the BCH main menu.
The MP>VFP was showing the following :
"Boot_Cell_will_Halt
MEM_HATL_CELL
MEM_PD_GET_TIME_FAILED
MEM_DIMM_ERR_DEALLOCATED
BLOWR_FAIL"

NB: Memory DIMMs location:
4 x 512MB (A6097A)in rank 0
4 x 256MB (A6802A)in rank 1

I switched the DIMMs between ranks and i used only one rank with either DIMMs type but i am still facing the same problem.

Please advise.

Regards

Roger

[Steven Schweda]

I know nothing, but ...

> BLOWR_FAIL"

Are the fans all turning?

A Google or Forum search for "BLOWR_FAIL"
might be interesting. For example:

http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=363467

[smatador]

Hi,
You have a BLOWR_FAIL, better phone to the hw support.

[Roro_2]

Hi,

I think the problem is with the deallocated Memory not with the fans.

Roger

[sujit kumar singh]

hi


yes there are mem fail as well as the blower fail, mem fail can cause you not get the BCH prompt. please log a hardware case with HP, might be cell board realted problem.

can you also give the SL and SEL that is system event logs that will be more clearer.

regards
sujit

[Sameer_Nirmal]

I would look at the outputs of the followings

SEL and FPL

PS - T

PS - Cell 1