HPE 9000 and HPE e3000 Servers
1748338 Members
4667 Online
108762 Solutions
New Discussion юеВ

No display & No GSP prompt in rp-5450 server

 
SOLVED
Go to solution
Ashish Mukherjee
Occasional Contributor

No display & No GSP prompt in rp-5450 server

We are having HP rp-5450 server which was down with no display in console and other clients were not able to login to system.
during working.
We have checked and found that server was not giving display during reboot after power-on.Server was also not providing us GSP prompt .All the three SMPS are showing
green LED(indicating SMPS ok).
No LED is blowing in Front Pannel of the server.
We have tried power on-off process many times but thereis no display in console,No LED is blowing in Front Pannel of the server and GSP prompt is also not available in console.
Looking for help & support from the group.
6 REPLIES 6
Torsten.
Acclaimed Contributor

Re: No display & No GSP prompt in rp-5450 server

This sounds like a bad gsp card.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ashish Mukherjee
Occasional Contributor

Re: No display & No GSP prompt in rp-5450 server

Thanks for reply.
My query is , in case of bad GSP card server will boot or not ??
In our case server is not booting and Power,attention,fault,remote LED's are off at front pannel.
Torsten.
Acclaimed Contributor

Re: No display & No GSP prompt in rp-5450 server

If automatic startup is configured the server may boot. The GSP is responsible to switch the LEDs on or off.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ashish Mukherjee
Occasional Contributor

Re: No display & No GSP prompt in rp-5450 server

When we are physically removing GSPcrad from server server takes power.POWER LED Stable Green but Server not booting.
Can we Change the slot of GSP card.
At present this GSP(Rev-B) card resides on 2nd slot.
Torsten.
Acclaimed Contributor
Solution

Re: No display & No GSP prompt in rp-5450 server

The card MUST be in that slot.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Ashish Mukherjee
Occasional Contributor

Re: No display & No GSP prompt in rp-5450 server

Thanks for your support.
In this scenario what may be faulty part --
1. GSP Card
2. System Board
3. Riser Board having slot for GSP Card