HPE 9000 and HPE e3000 Servers
1748236 Members
3559 Online
108759 Solutions
New Discussion юеВ

npar administration

 
SOLVED
Go to solution
pedliz12
Advisor

npar administration

while logged into an npar I go to CO
and It lists the live cells I go into a cell
(Let say cell3) and it says live console and I cannot do anything. How to I reset the npar to free up the cosole sessions?
3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: npar administration

Are you sure the nPar is up and running?

Did you press CTRL e followed by c f ?

You should use the network, connect and check this if there is a process running on the console..

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
pedliz12
Advisor

Re: npar administration

the npar is up and running and ct'l e cf does not work. How do i check to see if there is a process running on the network to this npar?
Torsten.
Acclaimed Contributor

Re: npar administration

how about a telnet to the OS directly (not to the MP) and run

ps -ef|grep console

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!