HPE 9000 and HPE e3000 Servers
1748269 Members
3704 Online
108760 Solutions
New Discussion юеВ

Re: Power Supply rp 3410

 
Sakui
Frequent Advisor

Power Supply rp 3410

Hi Guys;
My server is running hp_UX rp 3410.

I have this below alert.I have change the power supply which seems to work on another server.what next should i do. I am still getting this alert.


Notification Time: Mon Nov 12 23:47:17 2007

asprod2 sent Event Monitor notification information:

/system/events/ia64_corehw/core_hw is >= 1.
Its current value is INFORMATION(1).



Event data from monitor:

Event Time..........: Mon Nov 12 23:47:16 2007
Severity............: INFORMATION
Monitor.............: ia64_corehw
Event #.............: 103011
System..............: asprod2

Summary:
A Power Supply is removed from the system.


Description of Error:

A power supply was removed from the system. The system will still function
normally with the current number of power supplies.

Probable Cause / Recommended Action:

A power supply was removed from the system.

For information on the sensor that generated this event, refer to FRU ID
in Event Details section.

No action is necessary.

Additional Event Data:
System IP Address...: 192.168.1.122
Event Id............: 0x4738e60500000000
Monitor Version.....: B.01.00
Event Class.........: System
Client Configuration File...........:
/var/stm/config/tools/monitor/default_ia64_corehw.clcfg
Client Configuration File Version...: A.01.00
Qualification criteria met.
Number of events..: 1
Associated OS error log entry id(s):
None
Additional System Data:
System Model Number.............: 9000/800/rp3410
EMS Version.....................: A.04.20
STM Version.....................: A.53.00
System Serial Number............: DEH46501J1
Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/ia64_corehw.htm#103011

v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v


Event Details :

Event Date .............: Thu Sep 27 11:44:44 2007
Sensor Number ..........: 0x40
Sensor Type ............: Power Supply
Sensor Class ...........: Sensor specific
Sensor Reading/Offset...: 0000 (Sensor Reading)
Event Type.............: Not Applicable
Entity ID ..............: 10
Generic Message.........:
Power Supply : Power Supply Failure detected
Entity FRU Id Info......:
power supply (Sensor ID: Power Supply 1)
power unit / power domain (FRU ID: Pwr Spply 1 Ctrl)



>---------- End Event Monitoring Service Event Notification ----------<


2 REPLIES 2
Murat SULUHAN
Honored Contributor

Re: Power Supply rp 3410

Hi Sakui

Your STM is quite old, you can upgrade and try again

http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

Event explanation is
Event 103011

* Severity: INFORMATION
* Event Summary: A Power Supply is removed from the system.
* Event Class: System
* Problem Description: A power supply was removed from the system. The system will still function normally with the current number of power supplies.
* Probable Cause/Recommended Action:
o A power supply was removed from the system.
o For information on the sensor that generated this event, refer to FRU ID in Event Details section.
o No action is necessary.


I think you have 2 power supply in 3410, can you shutdown and swap the 2 PSs

Best Regards
Murat
Murat Suluhan
Torsten.
Acclaimed Contributor

Re: Power Supply rp 3410

IIRC, if a fan fail, the system disables one of the power supplies. Check the fans!

MP:CM PS

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!