rp3430 red system LED

[Maxim Coroli]

rp3430 crashed previously. Now, red system led blinks.
There is no messages in iLO logs.
stm found no errors in equipement.

Could anyone advice how to find a case of red system led or how to shut it down?

[Torsten.]

The MP (iLO) will trigger the red LED to be turned on, so there **must** be a related message in the logs.

BTW, it's a HP9000 rp3430 server or what?

# model

will tell you.

[Maxim Coroli]

model# is A7137A, HP server rp3440-4 Solution

[Torsten.]

Reading the MP logs will turn the LED off - please check the logs again to find the reason.

[Prashanth.D.S]

Hi Maxim,

It seems like you have a hardware fault on the box. You can get rid of LED indication by going to Management processor..

MP> sl ==> Select Option E for event logs and D to dump them on screen.
MP>sl ==> Now select F for Forward Process logs.

Also check

MP>cm
MP:CM>ps

For any powersupply or fan faults.

Now to check the reason for crash from OS check the following logs

1. /var/tombstones

Check the ts99 file with valid timestamp that concurs with the time of system crash.

2. /var/adm/crash

Check for latest crash dump again with latest timestamp.

Attach the MP logs along with ts99 file if generated let me check what best i can do here.

Best Regards,
Prashanth

[Maxim Coroli]

the problem is solved now
We have upgraded firmvare on server RP3440 - this is a solution
The system LED became green just after BMC firmware upgrade