rp4440 hpux11i , reboot , vfp yellow blink!

[xia yunduan]

a rp4440 installed hpux 11i, vfp yellow blink after reboot,anybody knows why? the attached is the live event. this is one of the live event.

Log Entry 3: 22 Jul 2005 06:13:17
Alert Level 3: Warning
Keyword: BOOT_NO_GO_SS_CONS
BOOT_NO_GO_SS_CONS
Logged by: System Firmware 0
Data: Implementation dependent data field
0x7680101200E00050 FFFFFFFFFFFFFFFF

[HGN · Accepted solution]

Hi

Looking at your attachmnet ,looks like you have a CPU related hardware issue, you need to open a case with HP and ask them to take a look,they would ask for all relavent details.

I had a hardware issue and had to mail them the logs from the console & hp replaced the hardware.

Rgds

HGN

[Torsten.]

check the path in BCH (boot console handler - interrupt the boot process), there should be something like that:

Console path: 0/0/1/1.0
Keyboard path: 0/0/4/0.0

[generic_1]

You have a hardware failure. Call HP and get a CE out to replace your failed components.
800 633 3600 if you are in US

[xia yunduan]

thanks for all reply!

where can i download any doc about the event's explain?

i searched all hp.com, but got nothing about the Keyword: BOOT_NO_GO_SS_CONS

:(

thanks again.

[Torsten.]

your warning appears between a message

BOOT_INIT_SS_CONS (init console)
and
BOOT_GET_DFLT_CONS
BOOT_INIT_DFLT_CONS (init default console),

so I guess, your console path configuration is not correct. Please check this entry like I wrote above.

[xia yunduan]

i have called hp 800 and sent him the attached txt here.he replied me that the console path is not correct,like Torsten Totzauer said.thanks all reply again!

hp 800 said they have tools to check the error code like 0x7680101200E00050 and determine this code is about console path, but they will not share the tool with me :(

anybody have the tools or any doc to share ? :)

another question with the same rp4440 is waiting you to show your point,thanks again!