RP7400 rev C sys board

[patrick_132]

Can any one tell me the dip switch setting for 550mhz cpu's?

[Andrew Rutter]

Hi Patrick,

I cannot tell you what they are as im at home not at work, but I do know that they are actually printed on the system board near the dipswitches.

There is a small graph with the settings for the 550/650 and 750mhz processors

I will post the settings when I can if no one else does.

Andy

[patrick_132]

it is printed on the rev A and rev B system boards but the rev C was left blank.

[Torsten. · Accepted solution]

Hi,

AFAIR dip 1 4 5 7 8 should be ON.

[Mridul Shrivastava]

For 550MHZ CPU, 1 4 5 7 8 should be ON and 2 3 6 should be off , else you won't get the proper speed.

[patrick_132]

Thanks for the Help, To bad they didnt just put the settings on the board or in the doc's.

[patrick_132]

Up and Running