HPE 9000 and HPE e3000 Servers
1748162 Members
3647 Online
108758 Solutions
New Discussion юеВ

Re: RP7420 Cell board

 
CIS_REUNION
Occasional Advisor

RP7420 Cell board

Hello,

i have an issue on an RP7420
we replaced the Cell 1 and now we aren't able to boot on partition 1 the only Partition shown is Partition O of the Cell 0

can some one give us some hints
Thanks
5 REPLIES 5
Torsten.
Acclaimed Contributor

Re: RP7420 Cell board

Please post

MP:CM> cp
MP:CM> sysrev
MP:CM> ps --> cabinet

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
CIS_REUNION
Occasional Advisor

Re: RP7420 Cell board

please find the ps command


[mp] MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
| | | | | | | |
| | |LAN\| Sys | | IO | |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M S|0 1| | 0 1 | 0 1 | 0 1 |
+---+----+----+-----+-----+-------+-----+
| 0 |* *|* *| * | * * | * * | * * |
+---+----+----+-----+-----+-------+-----+

You may display detailed power and hardware status for the following
items:

T - Cabinet
S - System Backplane
G - MP (Core I/O)
P - IO Chassis
C - Cell
Select Device: g

HW status for MP : No Fault Detected

Complex model string: 9000/800/rp7420

MP is failed over

Attention LED is ON
Remote LED is OFF

Battery state is good

Last MP software reset occurred TUE SEP 23 17:32:49 2008

MP firmware rev 6.012, built on Feb 22 2005 15:16:47

[mp] MP:CM>
Torsten.
Acclaimed Contributor

Re: RP7420 Cell board

How about the other commands?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
CIS_REUNION
Occasional Advisor

Re: RP7420 Cell board

mp] MP:CM> ps



Display detailed status of the selected MP bus device.





The following MP bus devices were found:

+---+----+----+-----+-----+-------+-----+

| | | | | | | |

| | |LAN\| Sys | | IO | |

|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |

| # |M S|0 1| | 0 1 | 0 1 | 0 1 |

+---+----+----+-----+-----+-------+-----+

| 0 |* *|* *| * | * * | * * | * * |

+---+----+----+-----+-----+-------+-----+



You may display detailed power and hardware status for the following items:



T - Cabinet

S - System Backplane

G - MP (Core I/O)

P - IO Chassis

C - Cell

Select Device: t



HW status for rp7420 cabinet : NO FAILURE DETECTED



Master/Slave failover is Disabled

Power switch is on

Right Door is closed

Top Door is closed

Left Door is closed



Total Power Available 7200 VA

Total Power Needed 1717 VA

Power Redundancy : redundant

Power Viability : viable





Power Status

---------------+-----+-----+-------+-----+

| | | | |

| Sys | | IO | |

|Bkpln|Cells|Chassis| BPS |

| | 0 1 | 0 1 | 0 1 |

---------------+-----+-----+-------+-----+

Populated | * | * * | * * | * * |

Enabled | * | * * | * * | * * |

Power OK | * | * * | * * | * * |

Warning/Fault | | | | |

Attention LED | | | | |





AC Line status:

Line A0 Present

Line A1 Present

Line B0 Present

Line B1 Present



Front Fan Speed : normal

Rear Fan speed : normal

I/O Bay Fan Speed : normal

Temperature state : normal

Main Fan Redundancy : redundant

I/O Fan Redundancy : redundant

Overtemp Shutdown Enabled





| BPS | PCI |

| Fans| Fans |

| 0 1 | 0 1 2 3 4 5 |

+-----------+-----+-------------+

Populated | * * | * * * * * * |

Failing | | |

Failed | | |



| Standby/Main Fans |

| |

| 0 1 2 3 |

+-----------+-------------------+

Populated | * * * * |

Failing | |

Failed | |



| Cell Fans |

| CPU C |

| 0 1 2 3 C |

+-----------+------------+

Cell 0 | |

Populated | * * * |

Failing | |

Failed | |

Cell 1 | |

Populated | * * * |

Failing | |

Failed | |





= 2 ==================================================================================

[mp] MP:CM> cp



--------+--+

Cabinet |0 |

--------+--+

Slot |01|

--------+--+

Part 0 |*.|



= 3 ==================================================================================

[mp] MP:CM> pe



This command controls power enable to a hardware device.



T - Cabinet

C - Cell

D - DVD/Tape

P - IO Chassis

R - Partition

Select Device: c

Enter cell number: 1



The power state is ON for Cell 1.

In what state do you want the power? (ON/OFF) on





Cell board power disabled - incompatible processors/cell.



Error attempting to power ON : RtnCodeFailure



= 4, 5, 6, 7 ==================================================================================

[mp] MP> sl



EVENT LOG MENU:



FPL: Forward Progress Log

SEL: System Event Log

LIVE: Live Events



CLR: Clear FPL and SEL

Q: Quit



[mp] MP:VW> live



Welcome to the Live Event Viewer



WARNING: Due to connection speed and/or to the number

of events being generated and/or to the format

option selected, the live event viewer may

silently drop events.



The following event format options are available:

K: Keyword

R: Raw hex

T: Text



The following event filter options are available:

A: Alert level

C: Cell

P: Partition

U: Unfiltered



Current filter option: Alert level 3

Current format option: Keyword



Select new filter/format option, or ^B to exit or to

resume display of live events

Switching to keyword format.

Waiting for events...

Switching to unfiltered.

Waiting for events...

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000001 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,5 1 3f000c5f05e00000 000000000000f04f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000000 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,5 1 3f000c5f05e00000 000000000000f14f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000001 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,1 1 3f000c5f01e00000 000000000000f04f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000000 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,1 1 3f000c5f01e00000 000000000000f04f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000000 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,1 1 3f000c5f01e00000 000000000000f14f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000001 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,4 1 3f000c5f04e00000 000000000000f04f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000000 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,4 1 3f000c5f04e00000 000000000000f04f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000000 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,4 1 3f000c5f04e00000 000000000000f14f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000001 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,4 1 3f000c5f04e00000 000000000000f04f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000000 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,5 1 3f000c5f05e00000 000000000000f04f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000000 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,4 1 3f000c5f04e00000 000000000000f14f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000001 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,4 1 3f000c5f04e00000 000000000000f34f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000003 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,5 1 3f000c5f05e00000 000000000000f14f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000001 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,4 1 3f000c5f04e00000 000000000000f04f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000000 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,5 1 3f000c5f05e00000 000000000000f14f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000001 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,5 1 3f000c5f05e00000 000000000000f04f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000000 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,4 1 3f000c5f04e00000 000000000000f14f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000001 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,4 1 3f000c5f04e00000 000000000000f14f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000001 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,5 1 3f000c5f05e00000 000000000000f04f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000000 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,4 1 3f000c5f04e00000 000000000000f14f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000001 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,4 1 3f000c5f04e00000 000000000000f14f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000001 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,5 1 3f000c5f05e00000 000000000000f04f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000000 PAT_DATA_FIELD_MINOR_FWD_PROG

OS 0,0,4 1 3f000c5f04e00000 000000000000f04f HEX_20_BIT_MAJOR_FWD_PROG

HPUX 0,0,0 0 0f000c6b00e00000 0000000200000000 PAT_DATA_FIELD_MINOR_FWD_PROG





MP MAIN MENU: (Note: MP Master/Slave failover has occurred)



CO: Consoles

VFP: Virtual Front Panel (partition status)

CM: Command Menu

CL: Console Logs

SL: Show Event Logs

HE: Help

X: Exit Connection



[mp] MP>

Torsten.
Acclaimed Contributor

Re: RP7420 Cell board

This is still missing:

MP:CM> sysrev


You replaced the cell and now you get

Cell board power disabled - incompatible processors/cell.


Please run and attach (!) the results:

MP:CM> ps

select cell 0 first, then again with cell 1!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!