HPE 9000 and HPE e3000 Servers
1748204 Members
4178 Online
108759 Solutions
New Discussion юеВ

Re: SD32000 and SD-16A processor speeds?

 
Mott Given
Frequent Advisor

SD32000 and SD-16A processor speeds?

What is the speed of the processors in two models of Superdomes: the SD32000 and the SD-16A?

Also, what are the SPECint2000 values on the SD32000 and the SD-16A? I could not find them at http://www.spec.org . (Note, I want to find SPECint2000, not SPECint_rate2000).

Mott Given
5 REPLIES 5
Pete Randall
Outstanding Contributor

Re: SD32000 and SD-16A processor speeds?

Mott,

750 or 875 MHz:

http://www.hp.com/products1/servers/scalableservers/superdome/index.html


SPECint2000: I don't know!



Pete

Pete
Pete Randall
Outstanding Contributor

Re: SD32000 and SD-16A processor speeds?

Mott,

How about SPECint_rate2000:

(http://www.spec.org/osg/cpu2000/results/res2002q3/)


Pete

Pete
Pete Randall
Outstanding Contributor

Re: SD32000 and SD-16A processor speeds?

Sorry! Obviously you said you didn't want SPECint_rate2000!

Brain cramp.


Pete

Pete
Todd McDaniel_1
Honored Contributor

Re: SD32000 and SD-16A processor speeds?

Here you go Mott... There appears to be no benchmark for Superdome.

HP PA-RISC and Alpha

Although there is no Superdome benchmark published from SPEC, I found the c3750 workstation that runs the same chip. It shows scores 642. This score exceeds the fastest UltraSPARC chips, and its performance lies between 1.0GHz and 1.1GHz POWER4 processor.


http://www.punknix.com/archives/000021.html
Unix, the other white meat.
Mott Given
Frequent Advisor

Re: SD32000 and SD-16A processor speeds?

Thank you all for your help. We use a third-party vendor to do analytical modelling of HP-UX, and by interpolating other values in their hardware table, I calculate the the
SD-16A (with 875 MHz processors) has a SPECint2000 rating of 9803 and the SD32000 (with 875 MHz processors) has a SPECint2000 rating of 19275.