Server L2000 HPUX 11.00

[Lubo]

DDS4 Hot Swap module included in Tape Array 5300.

# ioscan
lass I H/W Path Driver S/W State H/W Type Description
======================================================================
tape 1 0/0/1/0.5.0 stape NO_HW DEVICE HP C5683A


# syslog.log
eb 16 18:06:35 snms vmunix: SCSI: Resetting SCSI -- lbolt: -1406015875, bus: 0
Feb 16 18:06:35 snms vmunix: SCSI: Reset detected -- lbolt: -1406015875, bus: 0
Feb 16 18:06:41 snms vmunix: SCSI: Resetting SCSI -- lbolt: -1406015275, bus: 0
Feb 16 18:06:41 snms vmunix: SCSI: Reset detected -- lbolt: -1406015275, bus: 0
Feb 16 18:06:47 snms vmunix: SCSI: Resetting SCSI -- lbolt: -1406014675, bus: 0
Feb 16 18:06:47 snms vmunix: SCSI: Reset detected -- lbolt: -1406014675, bus: 0
Feb 16 18:06:53 snms vmunix: SCSI: Resetting SCSI -- lbolt: -1406014075, bus: 0
Feb 16 18:06:53 snms vmunix: SCSI: Reset detected -- lbolt: -1406014075, bus: 0
Feb 16 18:06:59 snms vmunix: SCSI: Resetting SCSI -- lbolt: -1406013475, bus: 0
Feb 16 18:06:59 snms vmunix: SCSI: Reset detected -- lbolt: -1406013475, bus: 0
Feb 16 18:10:51 snms vmunix: SCSI: Resetting SCSI -- lbolt: -1405990332, bus: 0
Feb 16 18:10:51 snms vmunix: SCSI: Reset detected -- lbolt: -1405990332, bus: 0
Feb 16 18:10:57 snms vmunix: SCSI: Resetting SCSI -- lbolt: -1405989732, bus: 0
Feb 16 18:10:57 snms vmunix: SCSI: Reset detected -- lbolt: -1405989732, bus: 0
Feb 16 18:11:03 snms vmunix: SCSI: Resetting SCSI -- lbolt: -1405989132, bus: 0
Feb 16 18:11:03 snms vmunix: SCSI: Reset detected -- lbolt: -1405989132, bus: 0
Feb 16 18:11:09 snms vmunix: SCSI: Resetting SCSI -- lbolt: -1405988532, bus: 0
Feb 16 18:11:09 snms vmunix: SCSI: Reset detected -- lbolt: -1405988532, bus: 0
Feb 16 18:11:15 snms vmunix: SCSI: Resetting SCSI -- lbolt: -1405987932, bus: 0
Feb 16 18:11:15 snms vmunix: SCSI: Reset detected -- lbolt: -1405987932, bus: 0
Feb 16 18:11:21 snms vmunix: SCSI: Resetting SCSI -- lbolt: -1405987332, bus: 0
Feb 16 18:11:21 snms vmunix: SCSI: Reset detected -- lbolt: -1405987332, bus:

Thanks for help.

[Pedro Rubio]

Hi Lubo,
First of all it will be necessary to check if bus 0 is that one (even I suspect it is)

For this use ioscan -fnCext_bus, it will show you external bus. Check if external bus 0 is 0/0/1.

If it is, I will suspect you have a termination problem on that bus so check if terminator(also cabling) is properly connected to the DDS.

Regards,
Pedro.