HPE 9000 and HPE e3000 Servers
1748288 Members
3429 Online
108761 Solutions
New Discussion юеВ

Showing System LED: Flashing Orange

 
sujeet joshi
Frequent Advisor

Showing System LED: Flashing Orange

Hi,

System LED is showing flashing Orange.

Is this a serious issue?

Thanks,

Sujeet
5 REPLIES 5
Fabian Brise├▒o
Esteemed Contributor

Re: Showing System LED: Flashing Orange

Hello.
This is a warning issue.

Check /var/adm/syslog.log

run
#dmesg

did you restart or made hardware changes to this server ?
Knowledge is power.
Ludovic Derlyn
Esteemed Contributor

Re: Showing System LED: Flashing Orange

hello

it's an alert or information in GSp
To switch off, go to GSP select SL (show event log) read this alert or select clear all

Regards
L-DERLYN
Peter Godron
Honored Contributor

Re: Showing System LED: Flashing Orange

Sujeet,
you will have to review the GSP logs.
On console:

CNTL+B
Select SL
Select E (to check the logs)
Select Q (quit)
Select X (Exit)



Greg Traud_2
Frequent Advisor

Re: Showing System LED: Flashing Orange

What kind of system?

I have an RX2620 which will flash when the logs fill up.
If I leave it alone, it'll stop flashing after only a couple of hours.

If I feel very ambitious, I'll log in to the Lights Out manager, navagate to the system status tab, and click on the system event log link. Then I can delete the log using the blue button if after browsing the log, I don't see any really interesting messages.

Usually tho, I just let it go out by itself.
perumal_2
Frequent Advisor

Re: Showing System LED: Flashing Orange

Hi Login to your MP console. There you need to choose SL
You can find the warning information when you choose the logs to viw that reading this logs will clear the warning indicator. After reading the logs are not so critical you have option of clearing the same too.
After you read/cleared the system indicator will turn to green from amber.


TQ
Perumal