HPE 9000 and HPE e3000 Servers
1753706 Members
5156 Online
108799 Solutions
New Discussion юеВ

Superdome (A5201A) and HPUX 11.0

 
Wilder Mellotto
Frequent Advisor

Superdome (A5201A) and HPUX 11.0

Hi, can I install hpux 11.0 in a superdome A5201A with PA8700 processor?
5 REPLIES 5
Steve Steel
Honored Contributor

Re: Superdome (A5201A) and HPUX 11.0

Hi

http://www.spectra.com/systems/hp/a5201a/a5201a.htm

spec sheet

11.00 is not supported


Steve Steel
If you want truly to understand something, try to change it. (Kurt Lewin)
Robert-Jan Goossens
Honored Contributor

Re: Superdome (A5201A) and HPUX 11.0

Hi,

http://h20338.www2.hp.com/hpux11i/downloads/public_hp-ux_systems_support.pdf

--
All models run HP-UX 11i v2 B.11.23 and v3.
No model runs HP-UX 11i v2 B.11.22 or older releases of HP-UX
--

Regards,
Robert-Jan
James R. Ferguson
Acclaimed Contributor

Re: Superdome (A5201A) and HPUX 11.0

Hi Wilder:

Aside from the fact that the minimum release supported by this *hardware* is 11.11, the 11.0 release has been out-of-support since December 2006, let alone not available since February 2005.

Regards!

...JRF...
Torsten.
Acclaimed Contributor

Re: Superdome (A5201A) and HPUX 11.0

It's a HP9000, so it will run with 11.11, 11.23 and 11.31.

11.00 is unsupported since end of 2006 already.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Robert-Jan Goossens
Honored Contributor

Re: Superdome (A5201A) and HPUX 11.0

Thorsten, my fault copied the wrong text.

All models run HP-UX 11i v1 - in 64-bit mode only - , v2 (B.11.23) and v3 (B.11.31).
No model runs HP-UX 11i v2 (B.11.22) or 11.0.