tpm specs for 650mhz pa 8700

[Mandosa]

i'm looking for tpm specs for two of our pa 8700 systems.
first one is an HP 2405, single CPU, PA8700 650mhz
sencond one is an HP 5405, 4 CPU's, PA 8700 650mhz

i can find these specs on much of the newer hardware but not for these older machines.
any help would be appreciated.
thanks,

[Mridul Shrivastava]

Hi Mark,

Have a look at the following thread.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1171613&admit=109447626+1200940441172+28353475

Hope this thread answers ur query.

[Mandosa]

thanks. helps a bit...but if the specs are given for a 16 CPU config, and i have only 4, is it a straight divide by 4 in this scenario to get the effective tpm?

thx.

[Mike Shilladay]

Hi Mark,

I have some approx figures for an rp2430 (Single 650MHz CPU) which was 10000 tpm. For the rp5405 4 way, I have an approx figure of 32000 tpm.

The original link I had has gone.

Hope that helps.

Mike.

[Mandosa]

thanks