Updating Complex Info

[Albert Goodman]

Hi All,

I have 2 rp8420 complexes and parstatus on each of them returns a Complex Name of:
Complex Name : Complex 01
...

Does anyone know how this can be changed?

Thanks in advance

[Robert-Jan Goossens_1]

Hi Albert,

Check this doc.

Title: How to change a hardpartion name for a Superdome?
Document ID: HSUPDKBRC00011181
Last Modified Date: 1/6/05

US
http://www2.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000076907946

Europe
http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000076907946

Regards,
Robert-Jan

[Torsten.]

Have a look at

man cplxmodify

[Albert Goodman]

Thanks Torsten,

I believe cplxmodify is available in HP-UX 11i v2 but not in 11i v1 which is the OS we are running.

Is another another way?

[Sivakumar TS]

Dear Albert,

You can even recreate the complex profile from the scratch, with new name.

If you have all the details of the partitions like... cell-IOC-coreIO etc and if you create with the same details the partitions wont be affected.


With Regards,

Siva.

[Jeff Schussele]

Hi Albert,

I think you can do this in the parmgr GUI.
Set your DISPLAY & run

/opt/parmgr/bin/parmgr &

If you can't change it there then it must be a function of the GSP.

HTH,
Jeff

[Torsten. · Accepted solution]

The command cplxmodify is available for 11i v1 too, see

http://docs.hp.com/en/B2355-60127/cplxmodify.1M.html

[Albert Goodman]

Thank you all for your kind and timely responses.