This widget could not be displayed.
HPE Aruba Networking & ProVision-based
1845517 Members
3767 Online
110244 Solutions
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
This widget could not be displayed.
New Discussion
This widget could not be displayed.
This widget could not be displayed.

Re: LLDP compatible switches

 
EA3
New Member

LLDP compatible switches

Hi,
i have created a Visio Addins app to automate the creation of network diagram using LLDP and SNMP protocol. So far it can detect all HP procurve and aruba switches that we have.

i wonder, if all HP switches compatible with LLDP ? can you give me the model (series) that are not compatible.

thanks.


1 REPLY 1
parnassus
Honored Contributor

Re: LLDP compatible switches

Since - AFAIK - there isn't a Switch Selector able to filter out which Switches do support/don't support a particular Protocol Standard (like the IEEE 802.1ab = LLDP)...I think you will be forced to figure that out by manually reading each and every Switch's data sheet (to be 100% sure).

Limiting the research to some ArubaOS-Switch based Switches (formerly ProCurve with ProVision OS) I can say that LLDP is supported by:

  • 3500, 3500 yl, 5400 zl, 6200, 6600 and 8200 zl since K.11 release
  • 3810M since K.16.01 release
  • 3800 since KA.15.03 release
  • 5400R zl2 since KB.15.15 release
  • 2930F since WC.16.02.0003 release
  • 2920 since WB.15.11 release
  • 2620 since RA.15.05 release
  • 2530 since YA.15.10 (and YB.15.12) release

Other Comware 5.20/7.10 based Switches (OfficeConnect and FlexNetwork) support LLDP too...as example, HPE OfficeConnect 1910, 1920 (both Comware 5.20 based) and 1950 (Comware 7.10 based).

Difficult a serious Switch doesn't offer support to IEEE 802.1ab (LLDP).


I'm not an HPE Employee
Kudos and Accepted Solution banner