ProCurve 2810 Erased

[mmau65]

Hello at All.

I've erased primary and secondary flash memories. See below:

Torre Radar# erase flash  primary

The Primary OS Image will be deleted, continue [y/n]?  y

Torre Radar# erase flash  secondary

The Secondary OS Image will be deleted, continue [y/n]?  y

Torre Radar#

Torre Radar# erase startup-config

 <cr>

Torre Radar# erase startup-config

Configuration will be deleted and device rebooted, continue [y/n]?  y

After this, I'm not able to connect to the switch (hyperterminal via V.24 or other) .....

so what can I do? I want to recovery that switch: is it possible?

Many thanks

[Alex_Ke]

You can recover your device over serial port. As attachment please find a recovery procedure.

[mmau65]

Hi Alex_Ke,

thank you, I'll give you a feedback asap.

Bye