Unable to to use Tagged vlan with layer 3 ?

[Tal BarOr]

Hello All,

We have a issue with switch configuration as follows we have a network with 2 x procurve 2910al 48 and procurve 2900 48.

I have 2 vlan's ID 1 and 2  and routing between them  ,on both switch I have set tagged vlan on uplinks ports and gate way on one of 2910al  switches  I have connected third switch 2900 48 model and set both vlan and tagged on LACP trk10

and the 2910 connected to it , after that I have connected 1 server which belongs to vlan id 2 , now when I trying to ping internally same vlan other host reside on other switch I don't have response same I can't ping that machine from other host same vlan.

Did I missed something please advice

Thanks

[LorenzoCastro]

Hello, did you ever fix your problem? I'm a bit confused on your conifg here, but if I am understanding you correctly hopefully I can point you in the right direction.  Are your trunks configured for the same untagged and tagged ports on each switch?  Are the trunks showing that they are up and successfully negotiated?  It would be helpful if you provided info on your switches for the trunks as well as vlans with the "show vlan 1", "show vlan 2", "show lacp" commands.   Thanks!