HPE Community
HPE EVA Storage
1753672 Members
6166 Online
108799 Solutions
New Discussion юеВ

After an ISL...

 
lucheman
Occasional Contributor

тАО01-31-2008 11:29 AM

тАО01-31-2008 11:29 AM

After an ISL...

After creating an ISL from my production fabric to my new 64 port switches, devices connected to my new 64 port switches do not show up under WWN's in Zone Admin. I can only see the attached devices under Ports and Attached devices. Does anybody know why this is, and if it is by design or not?

All switches are HP StorageWorks B series switches.

Thanks!
0 Kudos
Reply
2 REPLIES 2
Mark Poeschl_2
Honored Contributor

тАО02-01-2008 09:29 AM

тАО02-01-2008 09:29 AM

Re: After an ISL...

Not by design - everything on both switches should show up in zone admin. If you do a 'switchshow' on both switches do you see everything logged in to the fabric? Is the domain ID and PID format on both the production switches and the new 64 port ones set correctly?
0 Kudos
Reply
Ivan Ferreira
Honored Contributor

тАО02-03-2008 04:02 AM

тАО02-03-2008 04:02 AM

Re: After an ISL...

Maybe you don't have the adecuate domain fabric license. Check also "licenseshow" output.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.