cancel
Showing results for 
Search instead for 
Did you mean: 

After an ISL...

 
Highlighted
Occasional Contributor

After an ISL...

After creating an ISL from my production fabric to my new 64 port switches, devices connected to my new 64 port switches do not show up under WWN's in Zone Admin. I can only see the attached devices under Ports and Attached devices. Does anybody know why this is, and if it is by design or not?

All switches are HP StorageWorks B series switches.

Thanks!
2 REPLIES 2
Highlighted
Honored Contributor

Re: After an ISL...

Not by design - everything on both switches should show up in zone admin. If you do a 'switchshow' on both switches do you see everything logged in to the fabric? Is the domain ID and PID format on both the production switches and the new 64 port ones set correctly?
Highlighted
Honored Contributor

Re: After an ISL...

Maybe you don't have the adecuate domain fabric license. Check also "licenseshow" output.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?