HPE EVA Storage
1748194 Members
4031 Online
108759 Solutions
New Discussion юеВ

Re: Brocade B-series and HP SIM

 
johnisccp_1
Advisor

Brocade B-series and HP SIM

I am trying to setup HP SIM to monitor the Brocade switches using SNMP on HP SIM. HP SIM discover and recognize the device. The manage protocol shows up correctly:Management Protocols SNMP:1.0, SSH:SSH2.0-OpenSSH_3.8.1p1. The issue I am running into is the alert. When I disable and enable the port on the Brocade switch, I do not get the alert or see it in the HP SIM event logs. Does anyone know a way to test the Brocade switch with HP SIM? Keep in mind the Brocade switches are in production.

Thanks in advance
8 REPLIES 8
ColinF
Advisor

Re: Brocade B-series and HP SIM

from the cli try:

trackchangeshow

if both are not enabled try:

trackchangesset 1, 1
johnisccp_1
Advisor

Re: Brocade B-series and HP SIM

I try to run that command through CLI and I get
US-YD-FCSW10A:FID128:admin> trackchangeshow
rbash: trackchangeshow: command not found
ColinF
Advisor

Re: Brocade B-series and HP SIM

What fabric OS version? What model switch?
johnisccp_1
Advisor

Re: Brocade B-series and HP SIM

The fabric OS is 6.3.0a and the model 510
ColinF
Advisor

Re: Brocade B-series and HP SIM

sorry, missed an "s":

trackchangesshow
Johan Guldmyr
Honored Contributor

Re: Brocade B-series and HP SIM

You should not run FOS 6.3.0a

See this advisory:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02278109тМй=en&cc=us&taskId=101&prodSeriesId=3759005&prodTypeId=3709945
johnisccp_1
Advisor

Re: Brocade B-series and HP SIM

Thanks for the advisory. I finally got the the brocade switch to work with HP SIM. Does anyone know if HP SIM can alert me if there are performance issue on the brocade switch?
Johan Guldmyr
Honored Contributor

Re: Brocade B-series and HP SIM

I don't think so.

Check out the feature toptalkers and the program DCFM with fabric watch for that.