Finding Brocade Stencils in Visio

[Kites BM]

Hi,

I'm designing a SAN diagram for our environment
I need to add BROCADE Router to be added inthis diagram.The router is of model 750 and Type SLKWRM.
I tried searching for it in Visio site but cannot find it.
Any help in this regard is appreciated

[TTr]

Look in http://www.visiocafe.com
The brocade is not listed in the main screen, you have to search for it.

[TTr]

Actually the Brocade visio file does not have a lot of stencils. You may want to look at the IBM and HP SAN stencils, (they are relabeled brocades) and see if you find the 750 silkworm.

[Kites BM]

2nd reply works

[murat.kazanbiev]

its here:

http://www.brocade.com/news/artmachine/Design_System/icon_library.jsphttp://www.brocade.com/news/artmachine/Design_System/icon_library.jsp

[Aaron Laing · Accepted solution]

I just went looking for them, and found them on the top-level product page:

http://www.brocade.com/products-solutions/products/index.page

There are direct links to both the Ethernet and SAN Visio stencil .zip files. Under Product Resources on the right hand side, the 5th heading is "Stencils".

Kudos to Brocade - they've done a good job breaking them down into Current/Archive, and then by product family.

Enjoy,
Aaron

[Marcus Schack]

If you want the HP equivalent got to the HP-SAN file at http://www.visiocafe.com/hp.htm

[Kites BM]

Aaron,

The Brocade link is great!!

I've found more than what I wanted.

Cheers,
Kites