HPE EVA Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

HP EVA 6400 disk replacement procedure with no data loss or outage ?

 
SOLVED
Go to solution
Highlighted
Super Advisor

HP EVA 6400 disk replacement procedure with no data loss or outage ?

People,

 

I've just received the below two email from the EVA SAN array:

 

Most recent email:

****This is an automated message. Do not reply****
An alarm has occurred on HP P6000 Array System: EVA6400 WWN: 5000-1DB2-330C-81F3
Alarm type: Hardware condition change
Alarm description: Event Code: 094b000e - 0," A Volume was removed from a LDAD.");

 

First email:

****This is an automated message. Do not reply****
An alarm has occurred on HP P6000 Array System: EVA6400 WWN: 5000-1DB2-330C-81F3
Alarm type: Hardware condition change
Alarm description: Event Code: 093e420e - 4," A physical disk drive has disappeared.");

 

So what can I do to safely removed and replace the disk with the replacement drive with no issue or data loss to the existing system safely ?

 

Thanks.

Best regards,
2 REPLIES 2
Highlighted
Valued Contributor
Solution

Re: HP EVA 6400 disk replacement procedure with no data loss or outage ?

The event code: "094b000e; A Volume was removed from a LDAD" indicates a predictive failure disk has been ungrouped by EVA itself after migrating the data. Ideally you only have to check in CommandView to identify the disk bay in question and replace the disk.

 

Hope this helps!!

Zsal

Highlighted
Super Advisor

Re: HP EVA 6400 disk replacement procedure with no data loss or outage ?

ZSal,

So once it is in levelled mode, can I just pull and plug the new replacement disk drive ?

Do I need to do something in the EVA control center ?
Best regards,