Monitor HPE MSA Storage to HPE OneView

[Ari000]

Hi All,

I need a help to add MSA storage to HPE OneView, I read in some articles it doesn't support any other storage system by default other than 3PAR, is there any way to monitor MSA systems via SNMP instead of RIBCL.

Our OneView version is 4.20, however we can upgrade it to the latest if needed.

We need only to monitor the MSA not to manage.

Please suggest. Thank you.

[ChrisLynch]

Unfortunately, HPE OneView does not support monitoring MSA at this time. Please keep in mind that OneView is not a general purpose SNMP tool, similar to what HPSIM was.

[Ari000]

Thank you Chris. Is there a monitoring/management tool for multiple MSA 2040s. Please let me know if any. Else we can close this loop here.

[ChrisLynch]

HPSIM is still available, and has supported monitoring MSA. But it won't be for long. We are looking to retire it.

Also, what MSA model are you looking to centrally monitor?

[Ari000]

we have 10 MSA 2040's which we want to monitor centrally

[MarkTe]

Hello everyone,

I would like to follow up on this topic.

We have in our environment HPE OneView 8.5 and several HPE MSA 2060 storage devices.

Could you please let me know if it would be possible to monitor MSA 2060 storage devices from OneView 8.5.

Thank you,

Mark

[Sunitha_Mod]

Hello Mark,

Thank you for posting! 

Since you have posted in an old topic and there is no response yet, I would recommend you to create a new topic using the create "New Discussion" button, so the experts can check and assist you further.