quite a few servers have iLO thast just lock up

[cesarpegado]

I seem to get a few servers roughly every few days which the iLO becomes unresponive, which i'm not allowed to log in the web page, but putty still responds.

so normally i putty to them, and run the folloiwng cd /Map1 and then reset

This normaly fixes the issue, but i seem to be doing this on alot of servers now, Is anyone else getting this issue? 

[ChrisLynch]

This forum is specific to HPE OneView, not hardware issues.

However, what server generation do you have and experience this behavior?  What firmware version is installed?  If this issue continues, I would really suggest you open a support case, assuming you have an active support contract or they are still in warranty.

[cesarpegado]

Chris,

I'm trying to keep a record of what servers this happens, and see if there is a combination of BIOS / iLO versions that this regularly happens on.

I asked in here, as this seems to be happening a fair bit to us,. and i thought we wouldn't be the only ones to see this, and where as i get your point about it being a hardware fault, i thought as oneview is the first thing that notices has gone, i hoped someone may have seen it in here