HPE OneView
cancel
Showing results for 
Search instead for 
Did you mean: 

quite a few servers have iLO thast just lock up

 
Highlighted
Valued Contributor

quite a few servers have iLO thast just lock up

I seem to get a few servers roughly every few days which the iLO becomes unresponive, which i'm not allowed to log in the web page, but putty still responds.

so normally i putty to them, and run the folloiwng cd /Map1 and then reset

This normaly fixes the issue, but i seem to be doing this on alot of servers now, Is anyone else getting this issue? 

2 REPLIES 2
Highlighted
HPE Pro

Re: quite a few servers have iLO thast just lock up

This forum is specific to HPE OneView, not hardware issues.

However, what server generation do you have and experience this behavior?  What firmware version is installed?  If this issue continues, I would really suggest you open a support case, assuming you have an active support contract or they are still in warranty.


I am an HPE employee

Accept or Kudo

Highlighted
Valued Contributor

Re: quite a few servers have iLO thast just lock up

Chris,

I'm trying to keep a record of what servers this happens, and see if there is a combination of BIOS / iLO versions that this regularly happens on.

I asked in here, as this seems to be happening a fair bit to us,. and i thought we wouldn't be the only ones to see this, and where as i get your point about it being a hardware fault, i thought as oneview is the first thing that notices has gone, i hoped someone may have seen it in here