HPE OneView
1748255 Members
4154 Online
108760 Solutions
New Discussion юеВ

unable to add DL360p Gen8 server into OneView

 
SOLVED
Go to solution

unable to add DL360p Gen8 server into OneView

Unable to add DL360p Gen8 server into OneView 2.0 eventhough the ILO FW is 2.40 the latest One

Accept or Kudo

4 REPLIES 4
ChrisLynch
HPE Pro

Re: unable to add DL360p Gen8 server into OneView

You need to provide a lot more detail on your issue.  Please provide the following:

  • OneView version, Major.Minor.Revision.Build (Appliance -> Settings)
  • What was the error message?
  • Can you access the iLO of the server from another system?

I am an HPE employee

Accept or Kudo

Re: unable to add DL360p Gen8 server into OneView

- OneView Version:  2.00.07-0250853

- Error Message:

Unable to add server hardware: 15.171.212.32

Unable to communicate with '15.171.212.32'.

Resolution: Verify that '15.171.212.32' is a supported management processor with network connectivity. Consult the HP OneView Support Matrix for a list of supported hardware.
 
- ILO is Accessible from Other Servers without any Issue.

Accept or Kudo

Chris_L1
Advisor
Solution

Re: unable to add DL360p Gen8 server into OneView

Is the ILO on the same management VLAN of other HP servers in your instance of OneView?  Gateway and IP in the same arena?  On the VM - is a network adapter also configured to communicate with the IP/VLAN of the ILO?  

Re: unable to add DL360p Gen8 server into OneView

ILO and Appliance are running in different VLAN, I tried to establish Connection for the ILO from different Machine in the Same ALAN, It fails the Ping Communication.

Accept or Kudo