HPE SimpliVity
1748217 Members
4223 Online
108759 Solutions
New Discussion

Problem with Upgrade 3.7.8.232 to 4.0.1

 
Andy3812
Regular Visitor

Problem with Upgrade 3.7.8.232 to 4.0.1

Dear friends

I am trying to upgrade from 3.7.8.232 to 4.0.1.184 with CLI. The first OVA upgraded correctly, but the second one gives me an error. See pic.

ErrorHCI.jpg

The upgrade process looks good, but after the last restart the OVA rolls back to 3.2.8.232. The same problem with the Upgrade Manager.

Has anyone an idea?

Kind regards

Andreas

 

7 REPLIES 7
gustenar
HPE Pro

Re: Problem with Upgrade 3.7.8.232 to 4.0.1

Hello @Andy3812 

Thank you for using HPE Simplivity Forum. 

I think it would be necessary to look at the upgrade log file to determine what caused the failed upgrade. You can inspect the file and paste the output of the log here. The file is located at /var/log/svt-upgrade.log. 

To get access to the file you need to elevate to root in the OVC:

sudo su

source /var/tmp/build/bin/appsetup

Grep for FAILED or ERROR messages during your attempt to update. This file can have output from previous upgrades so make sure you just select the most recent output. You could also just attach the entire log file. 

Thanks.


I am an HPE employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
Andy3812
Regular Visitor

Re: Problem with Upgrade 3.7.8.232 to 4.0.1

Thanks for your help.

In svt-upgrade.log i found the following:

...

2020/10/20 13:08:28 INFO> SSACLI.pm:744 Controller::Factory::HP::SSACLI::buildPhysicalDrives - Found 9 physical drive(s)
2020/10/20 13:08:28 INFO> HP.pm:121 System::HP::overrideCustomerVisibleModelString - System Model: ProLiant DL380 Gen10; Customer Visible Model: HPE SimpliVity 380 Series 4000
2020/10/20 13:08:28 INFO> Base.pm:181 System::Base::_setCustomerVisibleModelStrings - Model strings [customerVisibleModel: HPE SimpliVity 380 Series 4000] [model: ProLiant DL380 Gen10]
2020/10/20 13:08:28 WARN> SystemManifest.pm:107 SystemManifest::SystemManifest::init - No system manifest could be loaded
2020/10/20 13:08:28 INFO> PreflightPostflight.pm:44 Common::PreflightPostflight::printSuccess - +Passed+ Instantiate HAL and update manifest
2020/10/20 13:08:28 INFO> postflight.pl:182 Postflight::run - Postflight action: Check if system supports Media Lifetime Manager and set svtfs static config entry
2020/10/20 13:08:28 INFO> Statusfile.pm:268 Util::Statusfile::atStep - 70% through step 1 (Booting up with new version): 3% of total
2020/10/20 13:08:28 INFO> PreflightPostflight.pm:44 Common::PreflightPostflight::printSuccess - +Passed+ Init Media Lifetime Manager config setting
2020/10/20 13:08:28 INFO> postflight.pl:182 Postflight::run - Postflight action: Reset Passthru.map on the ESXi host to ensure passthru map LSI reset settings are correct
2020/10/20 13:08:28 INFO> Statusfile.pm:268 Util::Statusfile::atStep - 74% through step 1 (Booting up with new version): 4% of total
root@192.168.1.82: Permission denied (publickey,keyboard-interactive).
2020/10/20 13:08:32 ERROR> PreflightPostflight.pm:34 Common::PreflightPostflight::printFailed - !FAILED! Reset Passthru.map on the ESXi host
2020/10/20 13:08:32 ERROR> PreflightPostflight.pm:39 Common::PreflightPostflight::printFailed - Could not establish SSH connection to ESXi host 192.168.1.82: unable to establish master SSH connection: bad password or master process exited unexpectedly
2020/10/20 13:08:32 ERROR> postflight.pl:228 Postflight::printFailed - PostFlight failure reason: Error in postflight failed: Could not establish SSH connection to ESXi host 192.168.1.82: unable to establish master SSH connection: bad password or master process exited unexpectedly
2020/10/20 13:08:32 WARN> postflight.pl:238 Postflight::printFailed - PostFlight failure detected; Initiating automatic rollback
2020/10/20 13:08:32 INFO> StateMachine.pm:29 Util::StateMachine::Factory - Returning Partition-based state machine instance
2020/10/20 13:08:32 INFO> Partition.pm:73 Util::StateMachine::Partition::init - At init, the current state is Pre-commit
2020/10/20 13:08:32 INFO> Partition.pm:99 Util::StateMachine::Partition::dumpState - /dev/sda4 -> /
2020/10/20 13:08:32 INFO> Partition.pm:103 Util::StateMachine::Partition::dumpState - /dev/sda4: LABEL="/" UUID="26cb0a6f-0bf7-492b-8a53-f0b3f5e6e663" TYPE="ext4" PARTUUID="4484968c-3b8d-4148-b5e6-284ce9a337f1"
2020/10/20 13:08:32 INFO> Partition.pm:103 Util::StateMachine::Partition::dumpState -
2020/10/20 13:08:32 INFO> Partition.pm:103 Util::StateMachine::Partition::dumpState -
2020/10/20 13:08:32 INFO> Partition.pm:99 Util::StateMachine::Partition::dumpState - /dev/sda1 -> /old

...

At 13:08:32 the error says that the OVC can not connect to the ESX host. Well, I can login to the host with putty, so i think the OVC use a wrong password or maybe a wrong key? How can i check that?

 

 

 

gustenar
HPE Pro

Re: Problem with Upgrade 3.7.8.232 to 4.0.1

Hello @Andy3812 

Sorry for the delayed response. I believe the error is related to this IP:

Could not establish SSH connection to ESXi host 192.168.1.82

Most likely this IP is not the Management IP of the ESXi host but either the storage or fed, could you confirm? 


I am an HPE employee.
[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
Accept or Kudo
AnkiN
Valued Contributor

Re: Problem with Upgrade 3.7.8.232 to 4.0.1

Hi @Andy3812 ,

Thank you for using HPE SimpliVity Forum.

Can you check if you are able to get the failure count as 0 while executing the below command from DCUI screen of the affected node?
pam_tally2 --user=root

The desired output should look like:-

Login Failures Latest       failure         From
root     0          mm/dd/yy xx:xx:xx xx.xx.xx.xx

Andy3812
Regular Visitor

Re: Problem with Upgrade 3.7.8.232 to 4.0.1

Thank you for your answer.

the ESXi host has the IP 192.168.1.82. The IP of the OmnistackVC is 192.168.1.83.

In the vCenter i can see errors on the host "Logon from root@192.168.1.83 not possible". I think the OmnistackVC tries with a wrong password. How can i check that or how can i change the Password? I am able to connect to the host with putty.

 

Kind regards

AnkiN
Valued Contributor

Re: Problem with Upgrade 3.7.8.232 to 4.0.1

Hi @Andy3812 ,

We need to first make the failure count of host login retry to zero and then update the digital vault on the respective OVC.
As there is a need for the execution of a few elevated commands, I would request you to log a support case for this.

They would be happy to assist you.

dontcallmeeddy
Occasional Advisor

Re: Problem with Upgrade 3.7.8.232 to 4.0.1

Hi,
we are facing some other Strange issue which was near the same. Our UpdatePath was 3.7.10 to 4.0.1 U1
and we saw during the Update the "CL Name" of one Node was missing with Error Code 103.

both commands that helped us out of this situation...

dsv-update-vcenter --server vcsaip --username 'administrator@vsphere.local' --password 'vcsapassword'
dsv-digitalvault-init --hmsuser 'administrator@vsphere.local' --hostip esxiip --hostuser 'root' --hmspassword 'vcsapassword' --hostpassword 'esxipassword'