HPE StoreFabric Switches
cancel
Showing results for 
Search instead for 
Did you mean: 

SN8000B - FC Blade Replacement Procedure

 
SOLVED
Go to solution
Highlighted
Honored Contributor

SN8000B - FC Blade Replacement Procedure

After coming up empty on searching for a replacement procedure, I am posting here...

Would it simply be to do a slotpoweroff for the blade, remove the blade, insert the new blade and slotpoweron?

Or is there a documented procedure somewhere?

 

Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
2 REPLIES 2
Highlighted
HPE Pro
Solution

Re: SN8000B - FC Blade Replacement Procedure

Highlighted
Honored Contributor

Re: SN8000B - FC Blade Replacement Procedure

Thanks Mike.  I found the same here as well: https://docs.broadcom.com/doc/53-1004106-11

...thanks to HPE Support.

Just wanted to confirm if manual intevention was needed.  Apparently, the FC blades are hot-swap... if you can call them that.  ;o)

Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)