HPE Synergy
1748019 Members
4624 Online
108757 Solutions
New Discussion

HPE Synergy 3820C 10/20G Converged Network Adapter does not support RHEL 7.4

 
amol nagtilak
Occasional Advisor

HPE Synergy 3820C 10/20G Converged Network Adapter does not support RHEL 7.4

Hi All,

   I have HPE synergy frame with 480 Gen 10 compute model. i am installing RHEL 7.4. But in RHEL doesnot support  HPE Synergy 3820C 10/20G for FC HBA. Is any one faced this problem? Or have any solution on this?

 

 

thanks 

Amol Nagtilak


thanks and regards,

amol nagtilak
5 REPLIES 5
m_icha
HPE Pro

Re: HPE Synergy 3820C 10/20G Converged Network Adapter does not support RHEL 7.4

Hello Amol Nagtilak,

Let us know if you have you tried the below driver version:

HPE QLogic NX2 10/20 GbE Multifunction Drivers for Red Hat Enterprise Linux 7 x86_64

This driver includes the below components:

Driver Version
--------------------------
cnic 2.5.20w
bnx2 2.2.5u
bnx2x 1.714.20
bnx2i 2.11.16.0
bnx2fc 2.12.3

Driver is certified for use with the below operating systems:

Driver RPMs for following OS distributions are available:
Red Hat Enterprise Linux 7 Update 5
Red Hat Enterprise Linux 7 Update 4
Red Hat Enterprise Linux 6 Update 9

m_icha

I'm an HPE Employee
Need assistance? Contact HPE Support
How to Say Thank You? Just click the KUDOS!
amol nagtilak
Occasional Advisor

Re: HPE Synergy 3820C 10/20G Converged Network Adapter does not support RHEL 7.4

 HI,

 thanks for reply. i already installed these drivers. I can see four n/w card. my requirement is out of four, two should be n/w card and remaining two should be FcoE card.

 

thanks 

Amol Nagtilak


thanks and regards,

amol nagtilak
m_icha
HPE Pro

Re: HPE Synergy 3820C 10/20G Converged Network Adapter does not support RHEL 7.4

Hello  amol nagtilak,

What type of interconnects are installed in your frame?

m_icha

I'm an HPE Employee
Need assistance? Contact HPE Support
How to Say Thank You? Just click the KUDOS!
amol nagtilak
Occasional Advisor

Re: HPE Synergy 3820C 10/20G Converged Network Adapter does not support RHEL 7.4

Hi M_icha,

thanks for your help. I raised the ticket to HPE and got resolution from them. 

 

 

thanks for your support.

 

Amol Nagtilak


thanks and regards,

amol nagtilak
AndreyFomin
New Member

Re: HPE Synergy 3820C 10/20G Converged Network Adapter does not support RHEL 7.4

Hello, Can you share a resolution?

I have the same issue on Synegry 480Gen10 + 3820c  with the latest firmware and drivers

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_2b4365c75acf4615867a73a2de#tab-history

RefHat 7.6 ( and tried on 7.5) wich should be fully supported

https://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/redhat_linux.aspx