1748213 Members
3328 Online
108759 Solutions
New Discussion юеВ

Re: Network Topology - IMC 7.3

 
AyrtonAG
Occasional Contributor

Network Topology - IMC 7.3

Hello everyone
I have a problem with the IMC 7.3 since I have implemented it in my network but the topology does not appear.
everything is well configured but only the topology needs to appear.
I do not know if I should make an extra configuration or what the problem is.
I hope you can help me.
Thank you

2 REPLIES 2
parnassus
Honored Contributor

Re: Network Topology - IMC 7.3

IMC uses SNMP to create the Network Topology of recognized devices...have your Switches been recognized correctly through SNMP by the IMC (do they appear as Switches and not as ICMP devices?)?


I'm not an HPE Employee
Kudos and Accepted Solution banner
AyrtonAG
Occasional Contributor

Re: Network Topology - IMC 7.3

effectively the equipment in the IMC is recognized as a switch by the SNMP. all the other characteristics of the IMC work but the topology is not shown nor can you edit everything in white Will there be a configuration problem?