Query: SNMPv3 Authentication Protocol on IRS only SHA not SHA512

[MarioE]

I use SANnav for my SAN Switch. I also have the SAN Switch in HPE Insight Remote Support to automatically open cases from the SAN Switch.  I monitor it via SNMPv3 traps.
I performed a FOS update to version v9.2.1c on my G720 SAN Switch via SANnav. The following warning appeared:

Currently, however, I can only select SHA for the SNMPv3 protocol on the IRS and not SHA512:

Is there an IRS update where I can select SHA512, or what do I need to configure here so that I can receive traps from the SAN Switch in the IRS in the future?

SANnav: 2.4.0a
SAN switch: v9.2.1c
IRS:
Software version: Insight Remote Support 7.15.0.0646
Content level update version: 7.15.0.654

[support_s]

Hello,

Thank you for posting! HPE Networking forum has moved to Airheads Community. For HPE Aruba Networking product queries, request you to visit and post your query here.

You can refer to this link for more details.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.