Errors during installation with DVD on SAS disk and RX3600 system

[Torsten.]

Ctrl[28] LSI Logic SAS Controller
Ctrl[5E] HP IR Volume HP01

You have 1 hardware mirror and 2 individual disks in this system.

Maybe the problem is related to firmware versions, need to check this.


Did you try the "scan again" button from the installer window?

[Satya Prasad Nemana]

Hi Torsten

Actually this seems to be a known problem on 11iv3 i guess since we find the same log on all the servers that we install, i dont think it is realted to the particular h/w.

yes, regarding the firmware, our servers are a bit old 1-2 years old and this could be one issue.

SYSREV



Current firmware revisions



MP FW : F.01.41

BMC FW : 05.07

EFI FW : ROM A 05.37, ROM B 00.00

System FW : ROM A 01.32, ROM B 00.00, Boot ROM A

PDH FW : 00.0d

DHPC FW : 01.23

UCIO FW : 03.0a

PRS FW : 00.08 UpSeqRev: 0b, DownSeqRev: 08

HFC FW : 00.03 SetRev: 00



-Regards,
Satya

[Viveki]

yes the FW is bit old for servers (not really 1-2 years :-)).

You must also consider the FW of the SAS HBA as well

[Sameer_Nirmal]

The messages is given by Ignite-UX so I would verify if it is IG-UX version related. I doubt though.

I would first update the SAS HBA firmware as well as the system firmware as they seems pretty old.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3257032&prodTypeId=15351&prodSeriesId=3257031&swLang=13&taskId=135&swEnvOID=54