LAN Routing
1752642 Members
5510 Online
108788 Solutions
New Discussion юеВ

Re: 3CR858-9 no ip address

 
roffegust
New Member

3CR858-9 no ip address

Hi :quest:

I have a 3CR858-91 Cable/DSL Router and i cant get any IP address and i cant get to the web interface to reset the router ar ther any other way to reset the router



Please Help

Roffe

Roffe.G

roffegust@gmail.com
2 REPLIES 2
gameguru
New Member

Re: 3CR858-9 no ip address

Forgotten Password and Reset to Factory Defaults:



1 Remove power from the Router.

2 Disconnect all your computers and the cable/DSL modem from the Router.

3 Using a straight through Ethernet cable, connect the Ethernet Cable/DSL port on the rear of the Router to any one of the LAN ports.

4 Re-apply power to the Router. The Alert LED will flash as the Router starts up, and after approximately 30 seconds will start to flash more slowly

(typically 2 seconds on, 2 seconds off). Once the Alert LED has started to flash slowly, remove power from the Router.

5 Remove the cable connecting the Cable/DSL port to the LAN port, and reconnect one of your computers to one of the Router LAN ports.

6 Re-apply power to the Router, and when the start-up sequence has completed, browse to:

http://192.168.1.1

and run the Setup Wizard. You may need to restart your computer before you attempt this.
roffegust
New Member

Re: 3CR858-9 no ip address

:)Thanks for the help that helpt me now it is working

Roffe.G

roffegust@gmail.com
Roffe.G

roffegust@gmail.com