5400 Router not letting me use the router id as a next hop?

[Munozj]

I have a remote router that's attached via two 10G Wavelenghts.  

10.0.0.4/30

10.0.0.8/30

It's advertising it's paths attached to the remote router via ospf like this..

10.30.0.0/16 10.0.0.6 1011 ospf External2 0 110
10.30.0.0/16 10.0.0.10 1010 ospf External2 0 110

Which works fine for the routes directly attached but..

i'm also trying to use this router as an edge internet router.  How do I setup this router to use the active path?  I tried creating a route,

0.0.0.0 0.0.0.0 10.20.0.1

which is the router id of the remote router.

but when i made this route, it woudln't show up in show ip route and trying to ping an internet source returned destination net unreachable.  

I tried advertising the interface that the internet is physically coming in but that just adtertised the /30 between us and the isp.  

Router diagram