1753768
Members
5293
Online
108799
Solutions
vgdisplay -v vg...
This part is important:
--- Physical volumes ---
PV Name /dev/disk/disk4_p2
PV Status available
Total PE 4228
Free PE 364 <======
Autoswitch On
Proactive Polling On
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
This part is important:
--- Physical volumes ---
PV Name /dev/disk/disk4_p2
PV Status available
Total PE 4228
Free PE 364 <======
Autoswitch On
Proactive Polling On
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
In your current config the system will use an extend from
PVG pvgorarca
then
PVG pvgorarcb
then
PVG pvgorarcc
...
and so on while lvextend.
If at least one of these groups does not have enough free space, the command will fail.
You probably need to add new LUNs (disks) to these groups ...
I noticed there are already 62 disks in this VG - so somebody planned this config carefully - do not destroy this environment!
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
PVG pvgorarca
then
PVG pvgorarcb
then
PVG pvgorarcc
...
and so on while lvextend.
If at least one of these groups does not have enough free space, the command will fail.
You probably need to add new LUNs (disks) to these groups ...
I noticed there are already 62 disks in this VG - so somebody planned this config carefully - do not destroy this environment!
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
The total is meaningless as long as at least 1 single disk has not enough space.
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
Hope this helps!
Regards
Torsten.
__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!
Please post the output of
#vgdisplay -v oraqunarc_vg
In your case the lv is stripped accross the pvgs. so if you have equal free space on the disks in pvg then only you can extend.
#vgdisplay -v oraqunarc_vg
In your case the lv is stripped accross the pvgs. so if you have equal free space on the disks in pvg then only you can extend.
I am an HPE Employee
