- Integrated Systems
- About Us
- Integrated Systems
- About Us
12-04-2019 12:26 PM - edited 12-04-2019 01:42 PM
Just trying to set up a cluster with MSA 1050 SAS & H241 HBA in HBA Mode (not RAID) in 2 x DL380 Gen8's with Hyper-V Server 2016 (with all updates) for a test environment.
I read the user guide, best practices and other pages but I am not making much progress. I am using Windows Admin Center (WAC) to configure everything. I have the failover clustering and MPIO services installed on both Hyper-V Servers.
I also have a another DL380 Gen8 with Hyper-V Server 2016 running a local VM with Server 2016 as the DC DNS DHCP Server. Both the cluster servers are joined to the domain as well.
I've tried using Failover Cluster Manager snap-in and Cluster Creation in WAC with these results:
1. Failover Cluster Manager Validation Wizard Snap-In but is failing on the List Disks test.
2. WAC Cluster Creation Preview is failing on network Adapter symmetry validation test.
I have a couple of questions:
1. When mapping volumes to initiators in the MSA storage management utility - do I map all the volumes to all the initiators? Is an initiator one port on one controller or how does that work.
2. When I try to format one or more of logical volumes through WAC, I get a disk is read only error but the disks are set to read-write in the MSA SMU. It seems only one server can access the disks even though I have MPIO and failover clustering installed but other times it works.
The H241 driver version is the latest - 18.104.22.168. Firmware - 7.00
Most of the guides I read relate to using fibre-channel or iSCSI setups so it's a little confusing. I like getting help from the forum, but I can also go through support or try spiceworks if I can't find any answers here.
I just seem to be missing something as I think this should be working with no issues. Let me know if I can provide more info or screenshots or maybe something is not compatible as this may help someone else down the road. It looks like I have some more learning to do as well.
First Edit: Looks like theres a Version 7.00 Firmware for H241 - I'll be trying that first. - Firmware updated now.
Thank you for your time!
Solved! Go to Solution.
01-29-2020 03:46 PM - edited 01-29-2020 03:53 PMSolution
I believe I solved this but I now have another issue which I will put in a new thread
I used Windows Admin Center to create a share on each node.
I used command line on each Hyper-V Server to install chrome -yes chrome runs as gui in hyper-v command prompt - weird.
Then I mounted ProLiant Support Pack P19473 which is for Gen10 servers but it had the latest drivers and firmware for some of the devices in the Gen8 server. I used chrome to load the PSP updater interface from the local shared folder.
I updated the firmwares and drivers of devices it found.
Then I mounted ProLiant Support Pack P03093 which is officially the last PSP for Gen8 Servers.
I installed any firmware and drivers that were not found in the Gen10 PSP.
I made sure MPIO was enabled in both Gen8 Hyper-V Server Nodes.
Then I found this information about claiming MPIO devices in poweshell on the Dell website:
So I ran the command:
mpclaim -r -i -a ""
and the cluster validation passed and I was able to create the cluster! Yay!
Now its failing when I try to create a file server role so off to a new post.