Networking
All Networking boards are read-only. Please visit https://community.arubanetworks.com/discussion to start a discussion
1845708
Members
3892
Online
110247
Solutions
Latest Articles and Discussions
JG923A doesn't have the dhcp client?
Posted to: Comware Based
08-22-2021 Hi,I have connected a network cable which provides the IP address via DHCP server but the JG923A switch does not take any IP. Maybe this model doesn't have the DHCP client?Other ?Thanks
0
Kudos
2946
Views
5
Replies
JG539A: Restore to Factory Default Configuration .....
Posted to: Switches, Hubs, and Modems
08-21-2021 Hi,should i factory reset an JG539A. In cli I try the Restore to Factory Default Configuration menu item but this appears: Password recovery capability is enabled. To perform this operation, firs ...
0
Kudos
5630
Views
11
Replies
cable stack aruba 2930F
Posted to: HPE Aruba Networking & ProVision-based
08-20-2021 Hi,i would like to stack 2 aruba switches 2930F, what kind of cables do i have to buy ? Thanks.
0
Kudos
7894
Views
3
Replies
Unable to remove snmp public community
Posted to: HPE Aruba Networking & ProVision-based
08-20-2021 I wanted to remove public snmp from HP J9782A 2530-24 SwitchSoftware revision YB.16.10.0015# sh run | i snmpsnmp-server community "public" unrestrictedTried used below command & gor a er ...
0
Kudos
5195
Views
3
Replies
Can IMC be used for ZTP of Aruba CX switches
Posted to: IMC
08-19-2021 Hi,I would like to ask if it is possible to use IMC ZTP flow process for the Aruba OS and Comware switches on the Aruba CX switches?I understand that IMC uses some default parameters for ZTP. One ...
0
Kudos
2577
Views
4
Replies
ProCurve 2810-24G: WebGUI access denied because of JAVA incompati ...
Posted to: Switches, Hubs, and Modems
08-19-2021 Greetings Forum.I know - this problem has been found on the internet but most comments were made some time ago...I am unable to log on to a 2810-24G using the web-interface. The browser (Edge or ...
0
Kudos
17867
Views
8
Replies