1833758 Members
2205 Online
110063 Solutions
New Discussion

boot problem

 
yatin
Frequent Advisor

boot problem

i get following error message how can i boot from alternate disk
Warning[10]: BMC System Event Log is full
9 REPLIES 9
Sunil Sharma_1
Honored Contributor

Re: boot problem

it seems it is windows machine. Please post it on windows section
Sunil
*** Dream as if you'll live forever. Live as if you'll die today ***
Brian Markus
Valued Contributor

Re: boot problem

To set bootpaths when at the BCH(when you interrupt the boot process)

path pri
path alt

To set primary and alternate bootpaths (once you are in multi-user mode)

setboot -p -a

once you are booted, to determine which disk you are booted off of,
echo boot_string/S|adb /stand/vmunix /dev/mem


here is the syntax for setboot:

>setboot
Primary bootpath : 0/0/1/1.2.0
Alternate bootpath : 0/0/2/0.2.0

Autoboot is ON (enabled)
Autosearch is ON (enabled)

You can then use the flags

-p to set primary path
-a to set alternate path
-b autoboot on/off
-s autoserch on/off


Hope this helps

-Brian.
When a sys-admin say's maybe, they don't mean 'yes'!
yatin
Frequent Advisor

Re: boot problem

this is not a windows a machine
Slawomir Gora
Honored Contributor

Re: boot problem

Hi,

if you want to boot from alternate disk/tape/cdrom you must

1. start server
2. when you will see:
"To discontinue, press any key within 10"
press any key
3. type sea command to scan devices
4. boot from you alternated device
ex:
bo p3
5. when you want to go into single user mode
you have to interact with IPL and
type command: hpux -is


Massimo Bianchi
Honored Contributor

Re: boot problem

Sยภเl Kย๓คг
Respected Contributor

Re: boot problem

Since the BMC Log is full you can reset it by
pressing the Reset-Button (in the backside of teh serevr)and hold the 'P' in the console keyboard simultaniously .Then Follow the instruction on the screen.
regards
SK
Your imagination is the preview of your life's coming attractions
yatin
Frequent Advisor

Re: boot problem

how can do it from console from efi prompt
Sยภเl Kย๓คг
Respected Contributor

Re: boot problem

What is the model no the machine?
Your imagination is the preview of your life's coming attractions
yatin
Frequent Advisor

Re: boot problem

I was able to clear logs using 'clearlogs'

but my system hangs at
Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 6132 MB 6132 MB 6132 MB
Kernel : 6132 MB 6132 MB 6132 MB
User : 5659 MB 4930 MB 4950 MB
-------------------------------------------------------------------------