Cannot Install HPUX 11.11

[Bui Xuan Huong_1]

Hi all,
My problem is when I attempt to boot off the core OS install media, it can read from DVD but it will stop at:
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 6289408 Kbytes, lockable: 4777860 Kbytes, available: 5506384 Kbytes
It just stalls there and does nothing.
What could the problem?
My server is rp4440, the media kit is hp-ux11i December 2004.
Regards
Huong

[Joseph Loo]

hi,

it does not look like u have booted from the DVD.

have u stop the autoboot, i.e. 10 seconds before continuing ...? Once, at the boot console menu, do a "sea" to search for path of the DVD and boot up, BOOT P<# of the path>.

u will then be requested to "Interact with IPL?", choose n.

regards.

[Mark Nieuwboer]

Hi Bui Xuan,

Your not booting from the CDROM drive.
When you boot get to the PDC prompt.
see this document.
http://www.porterdavis.org/computing/hp_boot/
then deo u search for your DVD drve and boot from it.

fgrtz. Mark

[Bui Xuan Huong_1]

Thanks for your reply.
But it is the firt thing I do. I was booting from DVD, I can see the led's DVD. My server is new one.
Huong

[Mark Nieuwboer]

If you are booting from the DVD it looks like a hardware isuee.
I remember i had something like this a long time ago with a L3000 i don't now what it was. disk cpu or memory.

grtz. Mark

[Bui Xuan Huong_1]

I can install this server by the hp-ux11i v1 June 2004 media kit. But I have to Install by it's media kit (december 2004 media kit).
Huong

[Mark Nieuwboer]

probebly you already have this document.
http://docs.hp.com/en/5991-0662/ch05s03.html#chdcifji

But i don't think this gives a answer.
Do you have another DVD of december 2004.
I think maybe the DVD is corrupt.

Or as the manual says it takes a time to check the memory maybe thats the problem you are to fast?

grtz. Mark

[Bui Xuan Huong_1]

Yes, I have 6 media kit. I was try it with 3 servers, but have the same problem.
Huong

[Robert-Jan Goossens]

Huong,

Do you have an older media install set ?

Try to boot from the older version, just to exclude bad media.

Robert-Jan

[Robert-Jan Goossens]

could you post your dvd part number ?

[Bui Xuan Huong_1]

The media P/N is : B3920-14091 (december 2004)
I can boot from DVD with June 2004 media kit.
Huong

[Steven E. Protter]

Order replacement media and try again.

May be a bad DVD drive or DVD.

Try mounting the dvd and reading it in another server.

SEP

[KCS_1]

Hi,Huong

I strongly agree with Steven's opinion.

One day, I remember that a senior engineer of my department has met the same problem without no errors on rp4440.
After some checked for all h/w ,he has made a decision to change the DVD to lower version(Sep. 2004) for cold installtion,it was a work history of him for us.

It might be a problem of bad DVD I guess.

[Bui Xuan Huong_1]

Thanhs for your hint, I will try to change by another DVD.
Regards
Huong