Error messages in /etc/rc.log

[Co van Berkel]

Hi,
After reboot there are some error messages in the /etc/rc.log file:

Server: rp4440-8, HP-UX 11.11

Error messages:
Initialize loadable modules
Output from "/sbin/rc1.d/S112kminit start":
----------------------------
* All configured modules are registered successfully.
* Newly built modules are initialized successfully.
insf: Unable to load the driver: drmfglinsf: Unable to load the driver: gvid_him
_fglrxinsf: Unable to load the driver: drmfglrxinsf: Unable to load the driver:
gvid_him_consinsf: Unable to unload the driver: drmfglinsf: Unable to unload the
driver: gvid_him_fglrxinsf: Unable to unload the driver: drmfglrxinsf: Unable t
o unload the driver: gvid_him_cons
NOTE: Module status

Name ID Status Type
=====================================================
krm 1 UNLOADED WSIO
gvid_info 2 UNLOADED WSIO
drmfgl 3 UNLOADED Misc
gvid_him_fglrx 4 UNLOADED Misc
drmfglrx 5 UNLOADED Misc
gvid_him_cons 6 UNLOADED Misc

Help me.., where is the problem?

Regards.

[Geoff Wild · Accepted solution]

Check this thread:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=747957

Rgds...Geoff

[Co van Berkel]

Hi,
Thanks for the quick reaction.
Seems that I can ignore these messages for now.
For the other messages in syslog I had already installed patch PHKL_31241, but thanks for the info.

Case closed.

CvB