K Class Chasis code help

[kenny chia]

Hi
I have the following chassis code displayed on my K class server LCD panel

FLT A088
BOOT DEV

Can someone help me decode?

[Fabian Briseño]

Hello kenny.

Check these links out, hope they help.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=946460

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=129008


Since when is this problem occurring, waht version of OS do you have ?.

Did you install any patch or hardware ?

[Steven E. Protter]

Shalom,

If you have added non-standard hardware, you need to remove it.

Otherwise this is probably a hardware issue and you need to have HP hardware service replace the effected parts.

SEP

[kenny chia]

Hi I did the following

1.Changed the console to a good one
2.Power cycle
3.When the testing messages are displayed on the LCD I caught a glimpse of the following "WARN 9001 CONSOLE"
4.I caught another glimpse of the following "WARN A088"
5.Final LCD display is as follows

FLT A088
BOOT DEV 0

6.Turn the key to service
7.Hit "Control B" on console, no response

[Fabian Briseño]

Hi kenny.

search the following link for k class servers information.

http://www.docs.hp.com/en/hw.html

It sound to me like a hardware error on your k class server.

also this link seems similiar to your problem.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1075883

[Matti_Kurkela]

www.openpa.net has a list of K-class LCD display codes:

http://www.openpa.net/doc/k-class-leds.html

FLT A088 = No console found, unable to boot
WARN 9001 = Alternate console(s) not found

WARN A088 is not listed. Are you sure it was not "WARN A008"? That would be "no bootable device found".

It seems your console connection is still not functional.

MK