HPE Community
Operating System - HP-UX
1850458 Members
3106 Online
104054 Solutions
New Discussion

parstatus on N-4000-75 abends

 
IT_2007
Honored Contributor

‎07-27-2006 06:51 AM

‎07-27-2006 06:51 AM

parstatus on N-4000-75 abends

what command to be run to see parstatus of Npar? This command works if it runs on rp7410 or higher level but abends.

Error: Unsupported platform. command aborted. (-12)
0 Kudos
4 REPLIES 4
melvyn burnard
Honored Contributor

‎07-27-2006 06:54 AM

‎07-27-2006 06:54 AM

Re: parstatus on N-4000-75 abends

That is because an N-class server does NOT support Npars, so you cannot use this command.
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
0 Kudos
Torsten.
Acclaimed Contributor

‎07-27-2006 06:55 AM

‎07-27-2006 06:55 AM

Re: parstatus on N-4000-75 abends

only a cell-based system can using npartitions. a n4000 can't be partitioned - this is an Unsupported platform.

rp7400 - not cell-based
rp7410 - cell-based

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
IT_2007
Honored Contributor

‎07-27-2006 06:58 AM

‎07-27-2006 06:58 AM

Re: parstatus on N-4000-75 abends

ok. thanks.
0 Kudos
IT_2007
Honored Contributor

‎07-27-2006 07:00 AM

‎07-27-2006 07:00 AM

Re: parstatus on N-4000-75 abends

got it. closing thread.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.