Operating System - HP-UX
1834746 Members
2795 Online
110070 Solutions
New Discussion

Problems after install a Patch

 

Problems after install a Patch

After install the patch PHNE_27886, the system no restart, is locked when start the OpenView (wait busy), i cant in for console, & i cant in for telnet, only response to ping.

In the check to install the patch, no give error, but never boot again.

The equip' is a 9000 K220 whit ux11.00

what i can do to revert the problem.

Thanks...
Alejandro Cóceres
3 REPLIES 3
RAC_1
Honored Contributor

Re: Problems after install a Patch

interrupt the boot procedure and boot into single user mode. do mountall and unconfig the patch.

Check for error before doing this. Check swagentd.log, swinstall.log for details.

Also check syslog.
There is no substitute to HARDWORK

Re: Problems after install a Patch

How interrupt the boot procedure, & in single user?...


Alejandro Cóceres
RAC_1
Honored Contributor

Re: Problems after install a Patch

loginto console and while booting it
To discontinue, press any key within 10 seconds.

press any key then it boots.
it goes to main menu.
say bo pri isl
say Y and it is hard booted now.

now say hpux -is.
you will boot into single user mode. say mountall and follow what I have given.

post the results.
There is no substitute to HARDWORK