SCSI cables

[Joan Blais]

Hi Gurus,
Quick question - Can a C2363B 10m VHDTS68/HDTS68 M/M Multim SCSI Cable be replaced by a D3637C 2.5m SCSI 68pin UHD-68pin HD Cable? Length is not an issue.

This will connect an rp8400 SCSI card A5159 to an HP Optical Juke Box, Model C1107M

Thanks, Joan

[Andrew Rutter · Accepted solution]

hi joan,

The part number cable is from the netserver range of accesories originally.
It is also only a 90ohm cable as opposed to the 120ohm C236x cables.

However as you are only connecting the optical jukebox to this it should be fine. These are only standard se scssi and do not require the multi mode cables

Andy

[Robert-Jan Goossens_1]

Specs of both cables

D3637C
Part is not orderable in the HP Parts Store.
SCSI interface cable with thumbscrews on both ends - Highly flexible 68-pin ultra high density (M) to 68-pin high density (M) - 90 ohms - 2.5m (8.2ft) lo

C2363B Part is not orderable in the HP Parts Store.
SCSI interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 128 Ohms - 10.0m (33ft) long

C2363BR Part is not orderable in the HP Parts Store.

regards,
RJ

[Joan Blais]

Great, just what I needed to hear. You guys are quick! I will cut over from a D class to an rp8400 Friday. I feel much better knowing that I have the right cables.