SHC Errors

[Coolmar]

I am running SCH on an hpux 11.11 system. The dynamic part goes fine. When it tries to run the static packages I get the following:

Running static rule package /opt/hpsmc/shc/packs/hpux/static/shcmemoryrp #1/13
Running rules (13)
00:09:56 MEM0006
00:09:56 MEM0020
09:12:24 Warning : /usr/dev/build/shc_b/release/1.1/0/hpux/xpcore/xp/procmgr/unix/UnixSign
als.cxx:105 entering defaultSignalHandler()
09:12:24 Warning : /usr/dev/build/shc_b/release/1.1/0/hpux/xpcore/xp/procmgr/unix/UnixSign
als.cxx:116 Signal #2 : SIGINT signal caught
09:12:24 Warning : /usr/dev/build/shc_b/release/1.1/0/hpux/xpcore/xp/procmgr/unix/UnixSign
als.cxx:122 Signal is fatal
09:12:24 Warning : /usr/dev/build/shc_b/release/1.1/0/hpux/xpcore/xp/procmgr/unix/UnixSign
als.cxx:123 Exiting process from inside signal handler. ExitCode = -1.
SHC kill requested by an external signal.
09:12:24 Warning : /usr/dev/build/shc_b/release/1.1/0/hpux/xpcore/xp/procmgr/unix/UnixProc
essTag.cxx:228 Unable to kill pid #25764. command = /sbin/sh . errno # 3 = No such process


Any ideas?

[Tim Sanko]

Have you checked your shared memory with ipcs or shminfo?

I may have something like that in my past...

Tim

[Alex Lavrov.]

What do you see in the error log? In the same directory you get the html summary, you should have the errors report.

Can you past it?

[Coolmar]

Alex,

What I posted is what I get in the error log.

S.

[John Mannion]

Hi Sally,

Could you send this problem to shc.support@hp.com and we'll handle it from there.

Also, If you could send the follow file:

/var/opt/hpsmc/shc/data/"hostname"/shc/latest/log/shcerrlog.htm

where hostname is the name of the host.

Thanks

John

[Coolmar]

Sent to shcsupport@hp.com