swlist error

[Chihak Ahn]

When I excute swlist command, the following messages occurred.

dicss8:/>swlist |more
# Initializing...
# Contacting target "dicss8"...
WARNING: Incomplete definition for the product "MeasureWare", beginning at line 34514. The following attributes are not defined: filesets the filesets contained in the product

What is the problem?

[Alexander M. Ermes]

Hi there.
Try the command :
swlist -l product | grep .....
If possible, take the swuninstall under CDE.
Then you have listed up all your software.
Rgds
Alexander M. Ermes

[Carol Garrett]

Software distributors IPD is corrupt. To fix it install something like Ignite, or if already installed swremove it then swinstall it, this will rebuild your IPD and fix the corruption.

[Dan Hetzel]

Hi,

Carol is right, IPD is corrupt.
It will be automatically fixed after a swinstall. Ignite seem the right candidate because it doesn't need a reboot.
If it's already installed, do a swremove first.

Best regards,

Dan

[Dan Hetzel]

Hi,

Carol is right, IPD is corrupt.
It will be automatically fixed after a swinstall. Ignite seems to be the right candidate because it doesn't need a reboot.
If it's already installed, do a swremove first.

Best regards,

Dan

[Dan Hetzel]

Hi again,

Here is a document describing the full procedure to rebuild the IPD is swlis gives errors.

http://europe-support.external.hp.com/cki/bin/doc.pl/sid=5e58372a17b318c4f3/screen=ckiDisplayDocument?docId=200000043976241

Best regards,

Dan