SysInfo /Logtool Memory Errors

[Vicki Webb]

SysInfo -ab indicated there were memory errors on our K380. Here is the info from Logtool. Does this indicate a pending failure?

Memory Controller in Slot EXT0
==========================================================
Slot: 2a/2b
Error Type: Double-bit: multiple bit or
Hard single bit: solid single bit error.
Page Status: Pending: page could not be obtained.
Bit Num / Bank: -1 / 1
Logged By: Hardware
First Detected: Tue Jan 18 08:07:38 2005
Error Count: 0
Error Addr: 0x40022d90
==========================================================

Memory Controller in Slot EXT0
==========================================================
Slot: 2a
Error Type: Single/unconfirmed: single-bit error that
could not be confirmed as either soft or hard.
Page Status: Pending: page could not be obtained.
Bit Num / Bank: 5 / 1
Logged By: Memlogd
First Detected: Fri Jan 14 05:46:50 2005

Last Detected: Fri Jan 14 06:49:30 2005
Error Count: 63
Error Addr: 0x297bff0

Sysinfo also said it had incompletely installed filesets, yet is says INSTALLED after everything in the list? Do I need to reinstall?

Found incompletely installed filesets
=====================================

PHCO_14810.ADMN-ENG-A-MAN installed
PHCO_14810.UPS-TOOLS installed
PHCO_15220.SYS-ADMIN installed
PHCO_16341.ADMN-ENG-A-MAN installed
PHCO_16341.ARRAY-MGMT installed
PHCO_16405.ADMN-ENG-A-MAN installed
PHCO_16405.SYS-ADMIN installed
PHCO_16405.UX-CORE installed
PHCO_16795.ADMN-ENG-A-MAN installed
PHCO_16795.CMDS-AUX installed
PHCO_17439.CMDS-AUX installed
PHCO_17439.CORE-ENG-A-MAN installed
PHCO_17556.VXFS-BASE-RUN installed
PHCO_17622.CORE-SHLIBS installed
PHCO_17622.PROG-MIN installed
PHCO_17622.UX-CORE installed
PHCO_17792.INETSVCS-BOOT installed
PHCO_17792.OBAM-RUN installed
PHCO_17792.SAM installed
PHCO_17792.SAM-HELP installed
PHCO_17792.UX-CORE installed
PHCO_18074.LP-SPOOL installed
PHCO_18183.SD-AGENT installed
PHCO_18183.SD-CMDS installed
PHCO_18227.C-MIN installed
PHCO_18227.CORE-SHLIBS installed
PHCO_18227.PROG-AUX installed
PHCO_18227.PROG-MIN installed
PHCO_18229.C-INC installed
PHCO_19479.LVM-ENG-A-MAN installed
PHCO_19479.LVM-RUN installed
PHCO_19486.ADMN-ENG-A-MAN installed
PHCO_19486.ARRAY-MGMT installed
PHCO_20182.CORE-ENG-A-MAN installed
PHCO_20182.UX-CORE installed
PHKL_14026.CORE2-KRN installed
PHKL_14119.CORE2-KRN installed
PHKL_14750.CORE2-KRN installed
PHKL_15689.CORE2-KRN installed
PHKL_16807.CORE2-KRN installed
PHKL_16983.CORE2-KRN installed
PHKL_17038.CORE2-KRN installed
PHKL_17333.CORE2-KRN installed
PHKL_17368.SPT2-DVR installed
PHKL_19080.C-INC installed
PHKL_19080.CORE-KRN installed
PHKL_19080.CORE2-KRN installed
PHKL_19169.VXFS-BASE-KRN installed
PHKL_19311.CORE2-KRN installed
PHKL_19321.CORE2-KRN installed
PHKL_19416.CORE2-KRN installed
PHKL_19416.FCMS-ENG-A-MAN installed
PHKL_19416.FCMS-KRN installed
PHKL_19416.FCMS-RUN installed
PHKL_19800.VXFS-BASE-KRN installed
PHKL_20123.CORE2-KRN installed
PHKL_20151.CORE2-KRN installed
PHKL_20155.C-INC installed
PHKL_20156.CORE2-KRN installed
PHKL_20156.KERN2-RUN installed
PHKL_20157.CORE2-KRN installed
PHKL_20158.C-INC installed
PHKL_20158.CORE2-KRN installed
PHKL_20159.C-INC installed
PHKL_20159.CORE-KRN installed
PHKL_20159.CORE2-KRN installed
PHKL_20168.CORE2-KRN installed
PHKL_20176.CORE2-KRN installed
PHKL_20222.C-INC installed
PHKL_20222.CORE-KRN installed
PHKL_20222.CORE2-KRN installed
PHKL_20223.CORE2-KRN installed
PHKL_20226.CORE2-KRN installed
PHKL_20333.CORE2-KRN installed
PHKL_20333.LVM-KRN installed
PHKL_20995.CORE2-KRN installed
PHNE_16546.NET2-KRN installed
PHNE_18527.INETSVCS-RUN installed
PHNE_18972.STREAMS-32ALIB installed
PHNE_18972.STREAMS-KRN installed
PHNE_18972.STREAMS-MIN installed
PHNE_18972.STREAMS2-KRN installed
PHNE_19754.LAN-RUN installed
PHNE_19754.LAN2-KRN installed
PHNE_19754.NW-ENG-A-MAN installed
PHNE_19826.LAN-RUN installed
PHNE_19826.LAN2-KRN installed
PHNE_19899.CORE2-KRN installed
PHNE_19899.NET2-KRN installed
PHNE_19899.NMS2-KRN installed
PHNE_20150.CORE2-KRN installed
PHSS_16587.CORE-SHLIBS installed
PHSS_16587.LANG-MIN installed
PHSS_20141.AGRM installed
PHSS_20141.DDX-ADVANCED installed
PHSS_20141.DDX-ENTRY installed
PHSS_20141.DDX-LOAD installed
PHSS_20141.DDX-SAM installed
PHSS_20141.DDX-SLS installed
PHSS_20141.DDX-UTILS installed
PHSS_20141.X11-SERV installed
PHSS_20141.X11-SERV-MAN installed
PHSS_20141.XEXT-DBE installed
PHSS_20141.XEXT-DBE-MAN installed
PHSS_20141.XEXT-DPMS installed
PHSS_20141.XEXT-DPMS-MAN installed
PHSS_20141.XEXT-HPCR installed
PHSS_20141.XEXT-HPCR-MAN installed
PHSS_20141.XEXT-MBX installed
PHSS_20141.XEXT-RECORD installed
PHSS_20146.KERN-RUN installed

=== END Incompletely installed filesets ===

[Steven E. Protter]

First try

swconfig \*

this will try and configure everything that is just installed.

If that doesn't work you'll need to be reinstalling things.

Some of these patches are very old and you'll actually need to install the new supersede patch.

SEP

[Scot Bean]

Single-bit errors are handled by the machine. If you see more / many of these, you should replace a the DIMM listed.

If you just see the one, or just a few, let it ride.

[Vicki Webb]

Thanks. I guess I will do some research to see if the superceded patches are installed. An HP rep was onsite late Dec to help config the box and installed a number of patches as well. If the newer patch is on, is there a way to get rid of these messages? If it is not, then when I install a new patch, will it get rid of these incomplete files?