rhel 4 ioscan equivalent?

[Brent DeGennaro]

I'm trying to determine what devices the rhel 4 sees connected. Specifically I'm trying to determine if the box sees a tape drive in our ESL9322 tape library.

[Steven E. Protter]

Shalom,

No equivalent.

I use dmesg and hwbrowser (GUI)

SEP

[Kevin Wright]

If you have the psp installed, you can run the HP fibre tools/commands hp_rescan. lssg/lssd, check your scsi files under /proc. All attached devices will show up there.

[dirk dierickx]

i can recommend 'lshw', it has packages available for rhel, check the site bellow for infos.

http://www.ezix.org/project/wiki/HardwareLiSter

[sabal]

Hi Brent,

You can use dmidecode & lspci to get a list of hardware connected.

Thanks

[skt_skt]

/proc/scsi/scsi should have your scsi tape (sequential device) information..

This is what i did for my scsi tape. You may have to find the equivalent module...

root]# lsmod|grep aic
root]# modprobe aic79xx
root]# lsmod|grep aic
aic79xx 189020 0 (unused)
diskdumplib 5324 0 [aic79xx]
scsi_mod 115240 4 [aic79xx st ips sd_mod]

[Hasan Atasoy]

for disk and tapes ;

cat /proc/scsi/scsi

Hasan.